Security door installation points

(1) The installation of the anti-theft door should be based on the type of anti-theft door used, and the appropriate installation method should be adopted.

(2) The door frame of the anti-theft door can be fixed to the wall with expansion bolts, or iron parts can be embedded at the opening when the wall is built, and the connection parts of the door frame can be welded firmly during installation.

(3) No matter what connection method is used between the door frame and the wall, there should be no less than 3 anchor points on each side, and they should be firmly connected.

(4) When installing the anti-theft door, it should be straightened and hoisted first. After the size is appropriate, it should be temporarily fixed, corrected and adjusted, and the connection and anchoring can be carried out after it is correct.

(5) It is required that the sliding door can be pushed and pulled flexibly after installation; the swing door is easy to open, closed tightly and firmly, and there is no self-opening and self-closing phenomenon.

(6) Anti-theft devices should be installed between the door frame and the door leaf or other parts.

(7) Hardware accessories such as handles, door locks, and observation holes on the anti-theft door must be complete; the password guard, electronic alarm password system, doorbell paging and other devices on the multi-functional anti-theft door must be effectively improved.

(8) The gap with the ground plane should be no more than 5mm.